Avlink YX-1044 Manuel d'utilisateur télécharger pdf (Page 16)

connected to the equipment. There are two ways of operation if you want to set channel 1

audio/video to channels 2, 3 and channel 3 audio/video to channel 1 for output:

First way: Make sure you have selected“Video” and “Audio” by checking the white boxes to the

left. Directly click on the corresponding icons on the matrix to turn them into

to complete the switching operation.

Second way:

Step 1: Make sure you have selected “Video” and “Audio” by checking the boxes to the left.

Step 2: First select the “Output” number keys 02, 03 and 04 to the right, and select the

“Input” number key 01 to the bottom. Afterwards, press consecutively the previously selected

“Output” number keys 02, 03 and 04 (or you can press the “Deselect all output” key). This way,

you have selected “Input” 01 and “Output” 02, 03 and 04 switching.

Step 3: First select the “Output” number key 01 to the right, and select the “Input” number

key 03 to the bottom. Afterwards, press the previously selected “Output” number key 01 (or you

can press the “Deselect all output” key). This way, you have selected Input 03 and Output 01

switching.

Upon completion of the above 3 steps, you have actually completed the switching operation of

having Audio/Video channel 1 to Output channels 2, 3 and 4 while at the same time successfully

switched from Audio/Video channel 3 to Output channel 1.

Example 2: Now, there is a YX-1044 matrix with the input/output ports properly connected to

the equipment. It is required to set the input/output connectors to switching from video channel 1

to output channels NO.1, 3 and also to switch from audio channel 2 to output channel 4. There

are two ways of operations:

First Way:

Step 1: Make sure you have selected “Video” and not “AUDIO”. Directly click on the icons

on the matrix corresponding to the INPUT number key 01 and the OUTPUT number keys

01、03

to turn into ，you have then selected video switching of input 01 and

output 01,03.

Step 2: Make sure you have selected “AUDIO” and not “Video”. Directly click on the matrix

icons corresponding to INPUT number key 02 and OUTPUT number key 04

to turn

them into ，you have then selected audio switching of input 02 and output 04.

Upon completion of the above 2 steps, you have successfully switched video channel 1 to

output channels 1, 3 and also switched audio channel 2 to output channel 4.

Second Way:

Step 1: Make sure you have selected “Video” and not “AUDIO”.

Step 2: Select the output number keys 01 and 03 to the right and input number key 01 to the

bottom. Afterwards, press consecutively the previously pressed output number keys 01 and 04 to

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Pas de commentaire

Avlink YX-1044 Manuel d'utilisateur Page 16