Avlink CX-2088 Manuel d'utilisateur télécharger pdf (Page 18)

CX Matrix Switching System—User Manual

6.0 Matrix Control Panel Operation

6.0.1 Input/Output Switching Key Operating Mode

Fast audio/video switching of the Matrix systems can be done by pressing keys on the front

panel (refer to the “Front Panel Key Pressing Instructions” for detail key pressing.)

Operation methods as follows:

“Switching Method＂+“Output Channel＂+“Input Channel＂

Follow instructions below:

“Switching Method＂

For synchronous audio/video switching or alternative switching, select “Synchronous

Audo/Video Switching,” “Audio Switching” or “Video Switching” as per “Audio” and “Video”

keys.

“Output Channel＂

The “OUT Row 1-8” keys on the front panel represent output channels 1 to 8 for connection to

peripheral display equipment.

“Input Channel＂

The “IN Row 1-8” keys on the front panel represent input channels 1 to 8 for connection to the

currently connected channels of the signal source to be switched.

6.0.2 Front Panel Key Functions

Part Function Key Function

LCD display shows current CX matrix status and

operation hints.

2 Output channel selection keys used for setting

audio/video output channels or for selection of Status

Mode or Reserved Number.

3 Input channel selection keys used for setting audio/video

output channels or for selection of Status Mode or

Reserved Number.

ALL

Implement all output selection keys via certain input

route.

---Example: First press the “ALL” key, then select the

input channel to output to all output channels; first press

the “ALL”key, then press the “OFF”key to close all the

presently displayed swtitching status.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Pas de commentaire

Avlink CX-2088 Manuel d'utilisateur Page 18